May
22
2012

How to fix!! – Brother printer reset

Have you ever experienced with printer stopping while you are printing and it shows an error like “Replace Toner Cartridge”, “Replace Drum Unit”, or indicator lamp include  “Toner, Drum, Status or Other” lighting. If you are lucky you might have a spare ink cartridge for replacing then you can continue your work smoothly.. “BUT”, if you are really want to print these critical work at midnight how are you going to do about this situation. Here, I have solutions for you. if you use “Brother Product”.

Brother series printer and Brother series fax machine reset

problem

When one of indicator lamp include  “Toner, Drum, Status or Other” lighting, or all of these indicator lamps lighting in the process of using printer and stopped printing, please reset the printer according to the following process in case of no paper jam or toner was not run dry were confirmed.

operate instruction

Brother series printer

Open the printer front cover. Press “GO” button until all indicator lamp lighting. Loosen “GO” button then close the front cover. the machine work properly.

Brother series fax machine

Open the front cover. Press and hold the CLEAR/BACK button. Press 1, when the display shows accepted

       

Brother all-in-one series printer reset

problem

In the process of using printer, if a message of “Replace Toner Cartridge” or “Replace Drum Unit” was displayed on the machine screen and stopped printing, you can reset printer according to the following steps in case of no paper jam or the toner was not run dry were confirmed.

operate instruction

Turn off the power of printer. Turn on the power while press “function” button. Enter code “91” then press “OK” or “start” button. Enter code “99” then press “OK” or “start” button. The machine work properly


About the Author: Phattharabophit Nanongkha

Leave a comment

You must be logged in to post a comment.




Member Area